Gas Work in Fitzroy Terraces
Fitzroy's Victorian terraces are narrow, deep and often renovated more than once. Gas lines that once fed a single wall heater now supply hydronic boilers, cooktops and continuous flow hot water, and some sections run under floors that are hard to reach. Older lines and fittings can develop small leaks you may not notice for months.
Our licensed gas fitters work across Fitzroy and the inner north. Call 0434 542 446 to book a check or a new connection.
Replacing a Cooktop in a Small Kitchen
Swapping an old cooktop for a new one sounds simple, but terrace kitchens are tight. Clearances to rangehoods, windows and benches have to meet the rules, and the new appliance may need more gas than the old one. We check the supply, fit the right connection and test everything before you cook on it.
Hydronic Heating Gas Supply
Many Fitzroy homes use gas hydronic boilers. If the boiler struggles to stay lit when other gas appliances are on, the supply line may be too small for the combined load. We measure pressure under load and fix the supply so your heating technician is working with the right gas flow.
If you smell gas, turn it off at the meter if safe, open windows, avoid switches and phones near the smell, and ring the emergency number on your gas bill. Call us once it is safe and we will locate and repair the leak.
Signs Worth a Check
- A faint gas smell near the meter or under the house
- Yellow or sooty flames on a burner instead of a clean blue flame
- A pilot light that keeps going out
- Gas bills rising without any change in how you use gas
Every gas job we finish in Fitzroy is pressure tested, and you receive a compliance certificate where one is required.
Common Questions From Fitzroy Customers
Can my old terrace gas line handle a new continuous flow hot water unit?
Sometimes not. Continuous flow units need a lot of gas at once. We measure the supply and tell you if the line needs upgrading first.
How long does a gas leak check take?
Most checks take under an hour. We pressure test the line and use detection equipment to find the exact spot if there is a leak.